Why Is My Geek Bar Pulse Not Charging?
The Geek Bar Pulse is a popular vaping device thanks to a lot of innovative features it offers. It is known for its amazing flavor and ease of use. Even when it offers such great features, some users encounter a Geek Bar Pulse not charging problem just like any other rechargeable vaping device.
Here we will explore different aspects of Geek Bar Pulse charging to understand things better.
Quick Look
- Why Is My Geek Bar Pulse Not Charging?
- How To Solve the Problem That Geek Bar Pulse Cannot Be Charged?
- Charging Instructions for Geek Bar Pulse: How to Charge Geek Bar Pulse?
- Safety Precautions to Consider for Charging Geek Bar Pulse
- Can I Use the Geek Bar Pulse Vape While Charging?
- Is It Normal for The Geek Bar Pulse to Heat Up When Charging?
- Can I Use a Power Bank to Charge My Geek Bar Pulse?
- FAQs
- Final Thoughts
Why Is My Geek Bar Pulse Not Charging?
Some common reasons why your Geek Bar Pulse not charging can be:
· Faulty cable
A dodgy or damaged charging cable is likely the source of the problem caused by Geek Bar Pulse not charging. Over time, the charger cables may become bad or break down. It ultimately results in poor electrical connection or unstable charging. Make sure to inspect your cable for any visible signs of damage to identify the problem. Or try it with some other device to see if it charges that device but not the vape.
· Faulty charger
An additional possible reason for Geek Bar Pulse not charging might be a malfunctioning charger. If the charger isn't supplying the needed power to your Geek Bar Pulse, it will probably not charge the vape appropriately. It is advisable that you run the device on a different charger that is compatible with your Geek Bar Pulse to know if there is an issue with the charger.
· Damaged or dirty charging port
Dust or other debris may be trapped in the charging port on your Geek Bar Pulse, and it impedes the charging process. Having damaged cable with broken pins can also make a charging problem. Take a look at the charging port and using a soft brush, remove any dust or debris found.
· Internal damage
Internal damage to the vape can also cause Geek Bar not to charge issue too. It can happen during the production process because of manufacturing defects. Another reason for internal damage is exposure to moisture. If you do doubt the internal damage then in that case you are advised to contact the manufacturer or retailer for the replacement.
· Battery problem
Your Geek Bar Pulse will not be able to charge properly if its internal battery is not working correctly. This vape uses lithium batteries and those are prone to degradation over time span. If this does not help either, then it is the time to replace the vape for safety and experience concerns.
Having a bigger vape with a replaceable battery may solve all these issues. Check out our collection of vape kits that offer 100+ watts here.
How To Solve the Problem That Geek Bar Pulse Cannot Be Charged?
Charging issues with your Geek Bar Pulse can be frustrating but they are often solvable with some basic troubleshooting steps. You can take the appropriate actions to resolve the issue by identifying common causes. You may try different solutions sequentially to solve the problem that Geek Bar Pulse cannot be charged.
· Try a different cable
Start by replacing the charging cable with a new or working one. This simple step can often resolve Geek Bar Pulse not charging issues caused by a faulty cable.
· Change your charger
If changing the cord does not solve the problem, then try a different charger. Make sure that the charger you use is the one compatible with the Geek Bar Pulse and that it can provide sufficient output voltage and current.
· Clean your charging port
Check the charging port thoroughly and then clean it with a soft brush or canned air if there is dirt or any debris. Be gentle to avoid causing any further damage and fix the Geek Bar Pulse not charging problem.
· Inspect the device for any physical damage
Check for any visible signs of damage to the charging port or other parts of the Geek Bar Pulse. It is advisable to seek professional help if you notice any damage.
Are you still unable to troubleshoot your Geek Bar Pulse? We recommend you try some other brand disposable vape from our huge collection here.
Charging Instructions for Geek Bar Pulse: How to Charge Geek Bar Pulse?
The Geek Bar Pulse is an innovative device that offers a unique vaping experience. It is crucial to understand the proper charging instructions for how to charge Geek Bar Pulse to ensure uninterrupted usage and maximum performance.
1. Use a high-quality USB Cable
The Geek Bar Pulse must be charged with a USB cable specific for charging the device. Using a quality cable is very crucial to ensure the cable's compatibility and the best charging performance. Do not use low quality wires since they might not provide adequate power output or fit well.
2. Connect to a Power Source
Insert the USB cable into the USB charging port of the vape. Insert the other end of the cable in a wall adapter or computer USB port. Be sure to verify that the power source is in good state and is capable of giving out constant power output.
3. Charging Indicator
This LED light on the charging device shoes the charging status when the device is connected to a power source. It lights up when you vape is charging and this LED light will automatically switch on and continue running until the vape is fully charged. This LED only turns off when the charging process is complete or the charger is disconnected.
4. Monitoring the Charging Process
As a Geek Bar Pulse recharges then the process of charging must be closely watched for safety and performance at its top. Please do not leave your device unattended while it's charging, especially overnight or for prolonged times.
5. Full Charge
The LED light will turn off once the Geek Bar Pulse reaches a full charge. It is recommended to disconnect the charging cable promptly to prevent overcharging. This can potentially affect the battery life and performance.
6. Geek Bar Pulse Charge time
The Geek Bar Pulse charge time can vary depending on the battery capacity and the power output of the charging source.
Safety Precautions to Consider for Charging Geek Bar Pulse
You must follow certain safety precautions to ensure safe and optimal charging when charging the Geek Bar Pulse.
Avoid extreme temperatures and direct sunlight
You should avoid charging the Geek Bar Pulse in extreme temperatures or putting the device in direct sunlight. This is because it can affect the performance and lifespan of the device because of extra heat.
Keep the device away from water or other liquids
One should avoid any risk of the charging device to be exposed to water or any other liquids while it is being charged. Such an event may result on a short circuit inside which is dangerous.
Disconnect the charging cable if you notice any signs of fault
It is important that you do not use the device or remove the charging cable if these signs of unusual heat or malfunction are reported to you.
Application of these safety steps is a great guarantee of an outcome we are aiming for which is a successful and safe charging for the Geek Bar Pulse.
Having a pod system with built-in protection circuits will bring you peace of mind in terms of safety precautions. Take a look at our collection of pod systems here.
Can I Use the Geek Bar Pulse Vape While Charging?
It is always recommended not to vape when your Geek Bar Pulse is charging.
It is usually better to avoid vaping while charging due to multiple reasons.
Safety Concern
The primary concern when using any vaping device while charging is the safety of the battery. Charging a battery generates heat. Continuous usage during this process can potentially increase the temperature. It can even lead to overheating or even battery failure. This can pose a safety risk to both the user and the device.
Charging Circuitry
Vaping technology often has a charging circuitry that is embedded in the device and controls the power from the charging source to the battery. While it is charging, using the device can influence the circuity that affects the charging process. It may cause inadequate charging of battery or its shorter life.
Battery Performance
Using the Geek Bar Pulse while charging can affect the overall performance of the battery. Continuous usage during charging can cause the battery to drain faster. It will ultimately reduce the battery life and overall vaping experience.
Device Longevity
Regularly using the Geek Bar Pulse while it is charging can put additional strain on the internal components of the device. It includes the battery and charging circuitry. This can lead to reduced device longevity and potential malfunctions over time.
It is advisable to consider alternative solutions if you find yourself needing to vape while your Geek Bar Pulse is charging. These alternative solutions usually include charging your Geek Bar Pulse Vape before the time you plan to use it.
Is It Normal for The Geek Bar Pulse to Heat Up When Charging?
Some people are concerned about whether it is normal for the Geek Bar Pulse to heat up when charging.
Geek Bar Pulse is powered with the help of a lithium-ion battery. These batteries possess high energy density and generate heat due to chemical reactions which occur within them while charging. Often, Geek Bar Pulse vaping devices will go through a level of heating as they are being charged for.
Furthermore, make sure that you know that heat or overheating are signs of a problem. Please, don’t use the device and call the manufacturer or specialist smoke shop If your Geek Bar Pulse is getting too hot.