How to Clean Your Vape Tanks?


You must routinely and completely clean your vape tank to preserve your vape kit's function, performance and to enjoy the excellent flavor from your e-liquids. These essential components could get clogged by thick vape juice or residual debris. This will take away the taste of your preferred e-liquid.

Without routine maintenance, your tank's airways and gunked-up coils will restrict the amount of vapor you can produce and its airflow. Use the tips mentioned to save money while enhancing the durability and quality of your coils and tanks.

vape tanks

Quick Rinse Clean

Your vape tank may occasionally only require a simple washing with water. This rinse is effective if you only need to remove a small amount of dust or other debris that got inside your tank. If so, follow the simple procedure listed below.

Detach the Tank from Your Mod

Simply remove the tank's screw from your vaporizer and set the battery aside. Select the atomizer to the side since you won't be cleaning that now as you disassemble the device as much as possible.

O-rings, top and bottom caps, glass tubes, and chimneys are some specific parts you should purchase to allow for cleaning. However, if any of these parts don't have a replacement part for you to buy, leave it on. Remember the placement of the parts and how it fits to prevent issues when putting them back together.

You don't need distilled water if your tap is not extremely hard. If so, using boiling or distilled water is a smart option.

Run it Through Warm Water

If you want a quick clean, just run everything through a warm water cycle. Simply place every piece under the water tap after that, ensuring the flow is moderate. Try to use hot water to help the oil run off.

Give the vape tank parts a thorough soak if you have time. Add a few drops of soap dish into the bowl if the parts have old e-liquid residue or are excessively oily. Leave the pieces in warm water for at least 30 minutes.

quick rinse clean a vape tank

Clean it with Dish Soap

Suppose you cannot afford an ultrasonic cleaner, and your grimy vape tank needs a thorough cleaning. You may still use other methods to make it shine, such as reputable cleaning solutions and chemicals.

What's best?

You already have all of these goods in your kitchen. They are all common home items. It's important to remember that you must thoroughly rinse and clean your vape parts. Remove them from the water before reassembling your tank.

  • Ethanol is a fantastic cleaner that will make your tank sparkle once more.
  • Isopropyl alcohol is a strong rubbing alcohol that removes caked-on grime and e-juice residue. Some people prefer not to use it within the tank, but if you give it a quick rinse afterward, there is no issue. It's better to use 70% alcohol than 90% or 99%.
  • Another solution that works well for cleaning clogged-up and oily vape tanks is baking soda along with these:
    • Vinegar, which is quite acidic and works wonders at cleaning up grime. Remember to thoroughly rinse your equipment to avoid the vinegar smell sticking around.
    • Vodka is excellent for thorough cleaning. Additionally, you can sprinkle a little of it into your soapy soak to aid in more effectively shifting the dirt.
    • Lemon juice is a tried-and-true cleaning solution. Use along with baking soda for optimal outcomes.

Let it Soak in the Warm Water

If you soak it too long, the plastic can deteriorate or become brittle. Fill the tank with water, then soak it for around 15 minutes. After that, clean the residue from the interior edges where the alcohol couldn't reach with a dishcloth dipped in cool (below 120°F) water. Avoid drying the parts immediately!

how to clean your vape tank

Dry Off Each Component and Let it Rest for 10 Minutes

It is crucial to completely dry the tank before reassembling and using your equipment. Shake off any water that remains in the tank after rinsing it. Make sure you do a nice rinse before assembling any part back on.

Use tissue paper to absorb any extra moisture. Try to make sure the tissue does not break off inside the tank.

Insert a tissue into the vaporizer, twist the corner, and use it to dry up any remaining moisture in the tank. Twist it around to absorb water and use it to dry out any excess liquid. There are a lot of creases that you often can't reach so look for those spots.

Since there will be some moisture left, it's advisable to let your vape tank air-dry for around five to ten minutes before adding fresh e-liquid and putting everything back together.


Why Do I Need to Clean Vape Tanks?

Because build-up residue can affect the flavor quality of your e-liquids, keeping your tank clean is essential. When e-juice has room to build up between refills, it covers your tank's coil, wicking material, and interior with an old, congealed layer of e-liquid.

When refilling your tank with new juice, the old e-juice left on the coil and tank heats up and either completely overpowers or clouds the flavor of the new e-juice.

Therefore, thoroughly cleaning your tank every week is crucial. It ensures your e-cigarette setup is operating at peak efficiency.

learning how to clean your vape tank

How Often Should I Clean My Tanks?

You must understand how frequently to clean a vape tank before we can discuss how to do it. If you're the kind that often switches flavors, you must thoroughly clean your tank to prevent flavor mixing. To avoid taste contamination, rinse it before refilling it with a fresh e-liquid flavor.

On the other hand, cleaning a vape tank every week or after ten refilled bottles of e-liquid is necessary. If you ever notice that your vaporizer isn't producing as much vapor or that your flavor experience isn't what you're used to, it's worth cleaning your tank to see if it will help.

Why Does My Tank Get Gunk in It?

Numerous organisms, including bacteria, algae, and fungi, may be to blame for the filth in your tank. These microbes can develop in the moist crevices. They can produce a substance that resembles sludge that can block filters and harm your engine. It's crucial to maintain a dry, clean tank to avoid this from happening.

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!
This email has been registered