Pioneer4You IPV D4 80W Mod
Sold Out Save $10.00
Pioneer4You IPV D4 80W Box Mod
The IPV D4 Kit is a radical mod that cause an industry frenzy. The IPV D4 is a single 18650 battery (not included) mod that has a lot of awesome features. The first thing we noticed were the awesome colors. It comes in a gold bronze, purple, and black. It has a wattage range of 7W-80W and an output Joule range of 10J-80J. The IPV D4 has a Standard resistance of 0.15ohm-3.0ohm and a Joule resistance of 0.05ohm-0.5ohm. The output voltage is 1.0V-7.0V while the input voltage ranges from 3.2V-4.5V. The IPV D4 has a wide temperature limit, for centigrade it is 100°C-300°C and a fahrenheit is 212°F-572°F. It is powered by the YiHi SX130H chipset so you know this bad boy is up to date with everything you need. The IPV D4 has a Micro USB port which allows you to update the firmware and charge it. The Pioneer4You iPV D4 80W TC Box Mod is the modernized evolution of the iPV D series, implementing improvements in structural design while presenting a fully integrated system with the utilization of the YiHi SX130H Onboard Chip. Designed as a direct successor to the popular iPV D3, the D4 is constructed with a soft-contour curve to fit comfortably in-hand, with the enlargement of firing mechanism and adjustment buttons for added ergonomic elements. The IPV D4 has a Micro USB port which allows you to update the firmware and charge it. Though it is not recommended to solely charge your batteries through the mod, having the option to charge it via USB is awesome if you're on the go!
IPV D4 80W Temp Control Box Mod Features:
- 18650 High Amp IMR Single Battery - Sold Separately
- Latest YiHi SX 130H Chipset
- Wattage Output Range: 5-80W
- Voltage Output Range: 1-7V
- Output Joules: 10-80JJ
- Min VW Atomizer Resistance: 0.15 ohm
- Min TC Atomizer Resistance: 0.05 ohm
- Temperature Control Range: 212-572F
- Supports Ni200, Titanium, and Stainless Steel Heating Elements
- Superior Aluminum Construction
- Magenetized Battery Cover
- Intuitive LED Display
- Low Voltage Protection
- Low Resistance Protection
- High Input Voltage Warning
- Output Short Circuit Protection
- Reverse Battery Protection
- Temperature Overheat protection
- MicroUSB Charging Port
- Spring Loaded 510 Contact
- 1 iPV D4 Box Mod
- 1 MicroUSB Cable
- Instructional Manual
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Eightvape® USA will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.