HexOhm 3.0 - Unregulated Series Box Mod (Anodized)
HexOhm 3.0 - Unregulated Series Box Mod (Anodized)
Since its first release, the Hexohm quickly became a crowd favorite, and for good reason: the sleek, classic design, hefty construction, impeccable machining, and lifetime warranty was enough to entice countless vapers to make the plunge. Now, the HexOhm is back and better than ever with the HexOhm 3.0 Series Box Mod!
With all new, redesigned internals, and a fresh, sleek look, this mod is an amazing overhaul of the HexOhm vaping experience.The HexOhm V3 Unregulated Box Mod proves that regulated mods are obsolete. The HexOhm 3.0 utilizes an all-new chipset for improved amperage handling, which means more bang for your buck -- up to 180W of bang, to be exact. The plastic internals have also received an overhaul, changing from 3D printed plastic to injection-molded ultem, a heat- and corrosion-resistant material gaining popularity in the vaping world. The battery sled holds two 18650 batteries (NOT INCLUDED) and holds them in place with solid brass spring-loaded contacts for fantastic conductivity and minimal voltage drop. The dual batteries are concealed behind a magnetic battery bay door that has been updated to hide the four rare earth magnets holding it in place. The 510 connection is an all new proprietary spring loaded 510 connection. Additional safety protections have also been incorporated, providing peace of mind in the event of things like reverse battery polarity and accidental pocket-firing.This powerful device uses a pair of 18650 batteries (NOT INCLUDED) wired in series to deliver up to 8.4 volts of vaping power! The battery sled holds two 18650 batteries and holds them in place with solid brass spring-loaded contacts for fantastic conductivity and minimal voltage drop. The dual batteries are concealed behind a magnetic battery bay door that has been updated to hide the four rare earth magnets holding it in place.
- Constructed Using Anodized Aluminum
- HEX-T/30-c Chipset
- Wattage Range: ≤180W
- Amperage Range: ≤30A
- Resistance Range: ≥0.1Ω
- ≥0.2Ω Recommended
- Accepts Dual 18650 Batteries (NOT INCLUDED)
- Magnetic Battery Bay Door
- Ultem Battery Sled
- Brass Battery Contacts
- Proprietary 510 Connection
- Stainless Steel Threading
- Signature Clicky Switch
- Safety Protection Suite:
- Reverse Polarity
- Low Voltage Cutoff
- 10 second Cutoff
- Master On/Off Switch
- Hexohm Engraving
- Dimensions: 50.8mm x 101.6mm x 25.4mm
IMPORTANT NOTE & DISCLAIMER
Unregulated Dual 18650 Series Box Mods:
Unregulated series box mods are devices that stack the voltage that is being applied to the resistance of the coil. This type of circuit creates a current from each battery at the same time and combines the voltage from each battery. While the voltage is multiplied by the number of batteries, the amp draw remains at that of a single battery.
Dual 18650 battery in series- 8.4v with 20 amp
This device is strictly for ADVANCED USERS and it is NOT recommended for beginners or those who do not fully understand your battery's Amp Limits in correlation with your Atomizer's Resistance. Use a married pair of new/genuine high drain batteries with this device. Please be aware that there is no low-voltage protection in this unregulated box, so be aware of what voltage your batteries are firing at. There is also no over-current protection, so keep in mind the amp limitations of your batteries as well. Use with extreme caution and always check your resistance with a meter (check often)! By purchasing the product, you agree that you are knowledgeable on how to properly use this product and that we are NOT responsible for any misuse or accidental malfunctions of this product.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Eightvape® USA will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.