Eleaf iStick Pico S 100W Kit
Sold Out Save $35.04
Eleaf iStick Pico S 100W Mod with ELLO VATE Tank included.
The iStick Pico S Mod is single-battery vape device featuring an ultra-sleek chassis inspired by sports car designs and is outfitted with an exposed battery housing tube featuring corrugated texture.
Dimensions measure 81mm X 52.5mm X 28.5mm.
Powered by a single 21700 or 18650 battery. Pair it with the high drain Avatar AVB 21700 battery to provide 4000 mAh of charge. The Pico S can fire up to 100W within 25 milliseconds. 7-color LED lights along the side of the battery provide a customizable glow. The Pico S features a clear OLED display screen which allows users to customize their settings using two tactile buttons located on the face of the unit. Featuring multiple control modes, including Temperature Control Mode.
The newly-released ELLO VATE tank completes this kit and provides users with a solid atomizer for producing massive and flavorful clouds. Featuring a 6.5mL capacity with one of the easiest refill mechanisms on the market. Simply rotate the top cap 180° counter clockwise to expose the kidney-shaped fill-hole, insert your E-Liquid, and rotate 180° clockwise to lock it closed. Dual air ports at the bottom of the tank provide massive airflow for the producction of large clouds. Honeycomb resin drip tip included. This tank also comes equipped with the new HW-Net HW-Multihole coil systems which heat more quickly and evenly then normal coils and produce intense flavor.
By connecting the Eleaf iStick Pico S to a computer via a USB port users are able to upgrade the device's firmware. Using the iStick Pico software available from Eleafworld.com you can customize your own logo to put on the iStick Pico S.
Features and Specifications:
- Size: 81mm X 52.5mm X 28.5mm
- Battery type: Single 21700(Not Included) or 18650 cell (with adapter)
- Output wattage: 1-100W
- Output voltage: 0.5V-9V
- Output mode: VW/Bypass/TC(Ni/Ti/SS/TCR)
- Resistance range: 0.05-1.5ohm (TC modes);0.05-3ohm (VW/Bypass mode)
- Thread type: 510 thread
- Customizable LED light
- Dimensions: 28mm X 56mm
- E-liquid capacity: 2.0ml/6.5ml
- Coil: HW-M 0.15ohm Head Multihole/HW-N 0.2ohm Head Net Coil
- Thread type: 510 thread
1x Eleaf iStick Pico S MOD
1x Ello Vate(6.5ml/2.0ml)
1x HW-M 0.15ohm Head (pre-installed)
1x HW-N 0.2ohm Head
1x 18650 Battery Sleeve (Battery Not Included)
1x QC USB cable
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Eightvape® USA will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.