asMODus Minikin Boost 155W Mod
Sold Out Save $30.04
AsMODus Minikin V1.5 Boost 155W Mod
AsMODus has announced the release of the Minikin Boost! The Minikin Boost retains the same body structure as its predecessor but with some additional features. A magnetic battery door with an enlarged AsMODus logo, a maximum power output of 155.0 watts, and the implementation of the new “Curve” firing mode.
The “Curve” firing mode is our newest firing mode which manually imitates the abilities of temperature control by allowing the user to set 5 different wattage over time presets for up to 10 seconds. For example you can have the device fire at 90.0 watts for .5 seconds and then at 80.0 watts for 3 seconds. This would be the perfect setting for quickly ramping up large gauge wire builds or Claptons for a perfect fire every time.
DON'T FORGET TO PICK UP SOME FRESH 18650 BATTERIES HERE!
The overall size of the Minikin has been increased so Atomizers up to 25mm can be used with no overhang.
Some pictures depict the noticeable differences between the original Minikin V1.5 and the Boost, with the Boost on the right in each of the comparison pictures.
- Requires 2x 18650 sized batteries (not included)
- Power output range: 5.0 – 155.0 watts
- Temperature control output power range: 5.0 – 120.0 watts
- Temperature control range: 212°F – 572°F / 100°C – 300°C
- Firing modes: Power, Curve, Temp Ni200, Temp SS304, Temp SS316, Temp SS317, Temp SS304, Temp Ti, TCR, and TFR
- Atomizer resistance range: 0.1 – 2.5 ohm
- Maximum output voltage: 7.5 volts
- Peak output current: 35 amps
- Micro USB port for charging as well as firmware updating
WARNING: THIS PRODUCT CONTAINS NICOTINE. NICOTINE IS AN ADDICTIVE CHEMICAL.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Eightvape® USA will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
All pictures are based on practicality, copyright reserved.